No products
Prices are tax included
Top sellers
-
-
-
Rotator cable PRO.SIS.TEL.
Antenna rotator cable for Prosistel D series 2x1mm2 4x0.5mm2 1 schield...
2,07 € -
-
-
-
Stainless steel Kit for Bayco 4 or 6mm guy wires ends
Hardware kit needed for each one guy wire.Material: Stainless steel.
35,87 € -
2 pieces SS U bolt for 45-50mm round tube
The U-bolt is supplied complete with stainless steel washers and nuts.
20,74 € -
-
expansion kit for 6m
With this additional kit antennas PST-152TV, PST-1524TV and PST-24TV...
60,39 €
Suppliers
No supplier
Top sellers
-
Guy wire Bayco 4mm
Monofilament suitable for guy wiring.Max Load 500 kgDuration: 30 years.
0,55 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Guy wire Bayco 6mm
Monofilament suitable for guy wiring.Max Load 1100kgDuration: 30 years.
1,16 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Rotator cable PRO.SIS.TEL.
Antenna rotator cable for Prosistel D series 2x1mm2 4x0.5mm2 1 schield (increases protection against atmospheric discharge and galvanic currents) De = about 8mm The cable can also be used on other rotors that require the same number of wires.
2,07 €If available in stock, the average preparation time for the courier: 1-3 days -
Copperwire for wires antennas
Wire: Copper 19 X 0.29mmWire diameter: 1.45 mmSection: 1.25 sq.mmElectrical resistance: 15 Ohm / KmSheath: black PE with UV filterSheath diameter: 3 mmTear resistance: 45 KgWeight: 1.338 Kg / 100m
1,16 €If available in stock, the average preparation time for the courier: 1-3 days -
Quick view
60,39 € If not available in stock, the average preparation time for the courier: 3-7 daysBalun PST-1,5KY
Balun 1:1 on ferrite rod, suitable for rotary dipoles and yagi Max power: 1,5Kw SWR: 1.1 1-52Mhz SO239 Complete with connecting wires jumper.
60,39 €If not available in stock, the average preparation time for the courier: 3-7 days -
Quick view
337,33 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-1524TV
Dipole multiband trapped 10-15-20-40m, in V-shaped configuration, omnidirectional.2 KW pepArm length: 6m, 4m arm projection on the groundMount on masts from 40 to 50mm OD, 60mm optional. suggested height of at least 5m, but also works well up to 2m.The antenna does not require guy wires.12Kg weightBalun 1:1 optional 6m kit optional
337,33 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Stainless steel Kit for Bayco 4 or 6mm guy...
Hardware kit needed for each one guy wire.Material: Stainless steel.
35,87 €In Stock -
2 pieces SS U bolt for 45-50mm round tube
The U-bolt is supplied complete with stainless steel washers and nuts.
20,74 €In Stock -
Quick view
19,52 € If NOT available from stock, the average preparation time for delivery: 5-15 daysPotentiometer 10K
Potentiometer 10K, spare part for rotators PST641, 2051, 61, 71 series A-B-C-D
19,52 €If NOT available from stock, the average preparation time for delivery: 5-15 days -
expansion kit for 6m
With this additional kit antennas PST-152TV, PST-1524TV and PST-24TV also operate on 6m.
60,39 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Two pieces SS U bolt for 55-60mm round tube
The U-bolt is supplied complete with stainless steel washers and nuts.
22,45 €In Stock -
Quick view
342,82 € If NOT available from stock, the average preparation time for delivery: 3-7 daysAntenna verticale PST-1524VC
Multiband vertical antenna trapped 10-15-20-40m, with loaded solid radials.Max solid loaded radial length = 2mUseful bandwidth:40m = ~150kc/s20m = ~250kc/s15m = total coverage10m = ~800kc/sRF chocke for electrostatic protection.2 KW pepSO239
342,82 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Rotator cable
Prosistel D/E-PRO series antenna rotor cable
3,60 €If available in stock, the average preparation time for the courier: 1-3 days -
Quick view
201,30 € If NOT available from stock, the average preparation time for delivery: 7-15 daysCustom rotator cage
Custom rotator cage.Included thrust bearing and 2m mast pipe Od 48mmPluggable on tubes with an outer diameter of 42-52mm.Universal drilling for Prosistel rotors, CDE / HAM, Create, Daiwa, Kempro, Yaesu etc.
201,30 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Balun PST-5KY
Balun 1: 1 5 KW pep, ferrite core, suitable for rotary dipoles and yagi Bandwidth: 1-30Mhz SO239 Complete with connecting wires jumper
96,38 €In Stock -
Quick view
184,46 € If NOT available from stock, the average preparation time for delivery: 7-15 daysStandard Rotator cage
Standard rotator cage.Included thrust bearing and 2m mast pipe Od 48mmPluggable into tubes with an inner diameter of at least 43mm.Universal drilling for Prosistel rotors, CDE / HAM, Create, Daiwa, Kempro, Yaesu etc.
184,46 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Quick view
975,63 € If NOT available from stock, the average preparation time for delivery: 1-4 weeksPST2051D
Heavy duty antenna Rotator, handle up 2.5 m2 (23 sq. Ft.) of antenna windload. Worm-wheel technology irreversible under mast torque. Large starting and braking torque Soft start e soft stop with programmable ramp speed. Two years warranty
975,63 €If NOT available from stock, the average preparation time for delivery: 1-4 weeks -
Quick view
1 407,09 € If NOT available from stock, the average preparation time for delivery: 1-4 weeksPST61D
Heavy duty antenna Rotator, handle up 3.9m2 (38sq. Ft.) of antenna windload. Worm-wheel technology irreversible under mast torque. Large starting and braking torque Soft start e soft stop with programmable ramp speed. USB Com port for PC Two years warranty
1 407,09 €If NOT available from stock, the average preparation time for delivery: 1-4 weeks -
Quick view
21,96 € If NOT available from stock, the average preparation time for delivery: 5-15 daysConnector for Prosistel rotator (DC motor)
Spare part for rotators PST-641, 2051, 61, 71, 110, 130 series D and D-PRO
21,96 €If NOT available from stock, the average preparation time for delivery: 5-15 days -
PST2-4080C
Dual band wire loaded dipole for 40 and 80m.40m full-size 80m loaded40m usable bandwidth 200Kc/s80m usable bandwidth 40Kc/s 11,5m for arm1:1 balun included SO2391,5KW pep
166,53 €In Stock -
Balun PST-5KW
Balun 1:1, 5 KW pep, ferrite core, suitable for wire dipoles Bandwidth 1-30Mhz SO239 Complete with connecting wire jumper
100,65 €In Stock -
Quick view
122,00 € If NOT available from stock, the average preparation time for delivery: 7-15 daysFolding base for V or vertical antenna...
The folding base enabling you to operate the vertical antennas or dipoles V with minimal effort.It is especially useful on roofs with tiles, where getting around is not particularly easy but also be comfortable on the terraces or in the garden.Pipe diameter = 48x3mm Total height = about 1,5m (5 ft)It can be installed on the side of pipes with outer...
122,00 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Quick view
220,33 € If NOT available from stock, the average preparation time for delivery: 7-15 daysCustom Heavy Duty rotator cage
Custom HD rotator cage.Included thrust bearing and 2m mast pipe Od 48mmPluggable on tubes with an outer diameter of 50-68mm.Universal drilling for Prosistel rotors, CDE / HAM, Create, Daiwa, Kempro, Yaesu etc.
220,33 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Quick view
238,51 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-152TV
Dipole multiband trapped 10-15-20m, in V-shaped configuration, omnidirectional.2 KW pepArm length: 4m, 3m footprintMounted on poles from 40 to 50mm, 60mm optional. suggested height of at least 5m, but also works well up to 2m.The antenna does not require guy wires.10kg weightBalun 1:1 optional 6m kit optional
238,51 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
186,66 € If not available in stock, the average preparation time for the courier: 3-7 daysPST-RD152T
Multiband rotating dipole 10-15-20m Max power: 2KW pep Rotating radius = 4m Shipping weight = 8Kg Wind area = 0,15m2 Max wind speed = 130km/h 6060T6 alluminum, SS hardware Balun 1:1 optional
186,66 €If not available in stock, the average preparation time for the courier: 3-7 days -
Guy wires anchor plate
Guy wires anchor plateCapacity 1000KgHot galvanized steelDiameter 135mmHoles x 10MA
46,12 €In Stock -
Balun PST-1.5KW
Balun 1:1, 1.5 KW pep, ferrite core, suitable for wire dipoles Bandwidth 1-60Mhz SO239 Complete with connecting wire jumper
67,71 €In Stock -
Quick view
21,96 € If NOT available from stock, the average preparation time for delivery: 5-15 daysConnector for rotor PST-61-71D (DC motor)
Spare part for rotators PST-61, 71 series D
21,96 €If NOT available from stock, the average preparation time for delivery: 5-15 days -
Quick view
762,26 € If NOT available from stock, the average preparation time for delivery: 1-4 weeksPST641D
Medium duty antenna Rotator, handle up 1.2 m2 (13 sq. Ft.) of antenna windload. Worm-wheel technology irreversible under mast torque. Large starting and braking torque Soft start e soft stop with programmable ramp speed. PC controllable via USB COM port Two years warranty
762,26 €If NOT available from stock, the average preparation time for delivery: 1-4 weeks -
Quick view
63,44 € If NOT available from stock, the average preparation time for delivery: 5-15 daysUpgrade kit box D - ETHERNET
UP-Grade Kit for controllers D - D/PRO e COMBO move from RS232 to ETHERNET
63,44 €If NOT available from stock, the average preparation time for delivery: 5-15 days -
Solid loaded radial for VF-VC series...
Solid loaded radial for VF-VC series vertical antennasAvailable for the following bands: 10 - 12 - 15 - 17 - 20 - 30 - 40mEach radial covers one bandSpecify the required band or bands in the order.It replaces the corresponding wire radial for each one operating band.Slightly reduces efficiency and usable bandwidth.Requires calibration
52,46 €if not available in stock, ready for shipping in 7-15 days -
-
Quick view
276,94 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-1524VF
Vertical antenna 4 bands trapped (10-15-20-40) with wire radials 1/4 lambda for each one band.Full bands coverage.RF chocke for electrostatic protection.2 KW pepSO239
276,94 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
PST-RD1524T
Multiband rotating dipole 10-15-20-40m Max power: 2KW pep Rotating radius = 6m Wind area = 0,28m2 Max wind = 130km/h Shipping weight = 9Kg 6060T6 alluminum, SS hardware Balun 1:1 optional
281,82 €If not on stock, average waiting time: 3-5 days -
Quick view
292,80 € If NOT available from stock, the average preparation time for delivery: 3-7 daysDipolo a V PST-24TV
Dipole dualband trapped 20m 40m, in V-shaped configuration, omnidirectional.2 KW pepArm length: 8m, ~11m footprintMounted on poles from 40 to 50mm, 60mm optional. suggested height of at least 5m, but also works well up to 2m.The antenna does not require guy wires.12kg weightBalun 1:1 optional
292,80 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
114,07 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST6J
J-pole antenna for 6m 5KW pep S0239
114,07 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
PST-RD273T
Multiband rotating dipole 12-17-30m Max power: 2KW pep Rotating radius = 5,4m Shipping weight = 8Kg Wind area = 0,16m2 Max wind speed = 130km/h 6060T6 alluminum, SS hardware Balun 1:1 optional
228,75 €If not on stock, average waiting time: 3-7 days -
Quick view
50,02 € If NOT available from stock, the average preparation time for delivery: 5-15 daysUpgrade kit box D - USB
UP-Grade Kit for controllers D - D/PRO e COMBO move from RS232 to USB
50,02 €If NOT available from stock, the average preparation time for delivery: 5-15 days -
Wall-mounted pole-holder bracket
Wall-mounted pole-holder bracketMaterial: Hot dip galvanized steelAccepts poles from 40 to 52mmHole for 10mm fixing bolts
79,30 €In Stock -
Quick view
241,56 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-152VC
Multiband vertical antenna trapped 10-15-20m, with loaded solid radials.Max solid loaded radial length = 2mUseful bandwidth:20m = ~250kc/s15m = total coverage10m = ~800kc/sRF chocke for electrostatic protection.2 KW pepSO239
241,56 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
PST-RD27T
Multiband rotating dipole 12-17m Max power: 2KW pep Rotating radius = ~4m Shipping weight = 8Kg Wind area = 0,15m2 Max wind speed = 130km/h 6060T6 alluminum, SS hardware Balun 1:1 optional
158,60 €If not on stock, average waiting time: 3-7 days -
PST-DDR7
Multiband double rotating dipole 10-12-15-17-20-30-40m Balun included - SO239 Max power: 2KW pep Wind area = 0.5m2 Max wind: 130Km Rotating radius = 6m Shipping weight = 18Kg Mast diameter: 40-50mm (60mm on request) 6060T6 alluminum, SS hardware
539,24 €In Stock -
PST-DDR5
Multiband double rotating dipole 10-12-15-17-20m Balun included - SO239 Max power: 2KW pep Max wind: 130km Wind area = 0.28m2 Rotating radius = 4m Boom = 1m Shipping weight = 13Kg Max mast diameter = 40-50mm (60mm on request). 6060T6 alluminum, SS hardware
394,67 €In Stock -
PST-1011J
J-pole antenna for 10-11m 5KW pep S0239
176,29 €If available in stock, the average preparation time for the courier: 1 day -
PST-40VF
Vertical monoband antenna for 40m, with wire radials 1/4 lambdaHeight: ~ 10.4mConnector: SO239Max power: 5KWSWR: <= 1: 1.5Wind area = 0.2m2Max wind: 130KmShipping weight = about 8KgAccepts 40-50mm mast (60mm on request)6060T6 aluminum, stainless steel nuts and bolts
207,40 €In Stock -
Quick view
199,10 € If NOT available from stock, the average preparation time for delivery: 7-15 daysStandard HD Rotator cage
Standard HD rotator cage.Included thrust bearing and 2m mast pipe Od 48mmPluggable into tubes with an inner diameter of at least 50mm.Universal drilling for Prosistel rotors, CDE / HAM, Create, Daiwa, Kempro, Yaesu etc.
199,10 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Quick view
276,94 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-273VC
Vertical antenna 3 bands trapped (12-17-30m) with solid loaded radials for each one band.Full bands coverage.RF chocke for electrostatic protection.2 KW pepSO239
276,94 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
40m band TV - RD upgrade kit
With this upgrade kit you add the band of 40m to the following antennas: PST-152TV - PST-RD152T
176,90 €if not available in stock, ready for shipping in 7-15 days -
Base for vertical antennas
Base bracket for vertical antennas or replacment part.Material: Stainless steelInsulators 30-32-35mm (specify in the order)U bolts 50mm 8MA (anchored to poles from 40-50mm)SO239 connectorRF Choke include (DC grounded)Stainless steel screws
83,57 €In Stock -
RF choke for VF-VC series vertical antennas
Short circuit impedance for VF-VC series vertical antennasDischarges electrostatic charges to ground reducing the risk of damage to the receiver input stage.Reduces background noise typical of verticals by approximately 2 S points.It does not alter the operation of the transmitting antennas.Operating band: 7-30MhzMax power: 2KW pep
21,96 €if not available in stock, ready for shipping in 7-15 days -
Quick view
164,70 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-152VF
Vertical antenna 3 bands trapped (10-15-20m) with wire radials 1/4 lambda for each one band.Full bands coverage.RF chocke for electrostatic protection.2 KW pepSO239
164,70 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
283,04 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-273TV
Dipole multiband trapped 12m-17m and 30m, in V-shaped configuration, omnidirectional.2 KW pepArm length: 5,5m, ~4m footprint Mounted on poles from 40 to 50mm, 60mm optional. suggested height of at least 5m, but also works well up to 2m.The antenna does not require guy wires.11kg weightBalun 1:1 optional
283,04 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Base bracket for vertical antenna
Base bracket for vertical antennas or homemade parts.Material: Stainless steel thickness 3mmAccept insulators from 30-32-35mm and bolts 6MAAccepts U Bolts 40 to 50mm 8MAPrepared for SO239 connector
33,55 €In Stock -
Connector for rotor PST-641-2051D (DC motor)
Spare part for rotators PST-641, 2051 series D
7,32 €If NOT available from stock, the average preparation time for delivery: 5-15 days -
PST-RD274T
Multiband rotating dipole 12-17-40m Max power: 2KW pep Rotating radius = 6m Shipping weight = 8Kg Wind area = 0,18m2 Max wind speed = 130km/h 6060T6 alluminum, SS hardware Balun 1:1 optional
256,81 €If not on stock, average waiting time: 7-15 days -
Quick view
350,14 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-34VC
Vertical antenna 2 bands trapped (30-40m) with solid loaded radials for each one band.Full 30m band coverage, 110Kc on 40mRF chocke for electrostatic protection.2 KW pepSO239
350,14 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
2 494,90 € If NOT available from stock, the average preparation time for delivery: 1-4 weeksPST71D
Extra Heavy duty antenna Rotator, handle up 8.8m2 (80sq. Ft.) of antenna windload. Worm-wheel technology irreversible under mast torque. Large starting and braking torque Soft start e soft stop with programmable ramp speed. A Controller fully controllable via USB Com port Two years warranty
2 494,90 €If NOT available from stock, the average preparation time for delivery: 1-4 weeks -
Quick view
225,09 € If not available in stock, the average preparation time for the courier: 3-7 daysPST-RD4017S
Loaded 17-40m rotary dipole. Bandwidth = 150Kc on 40m full coverage of the other band/bands and also perfom on 6m. Max power 2KW pep Balun is recommended
225,09 €If not available in stock, the average preparation time for the courier: 3-7 days -
Quick view
102,48 € If NOT available from stock, the average preparation time for delivery: 7-15 daysFolding base for V or vertical antenna (male)
The folding base enabling you to operate the vertical antennas or dipoles V with minimal effort.It is especially useful on roofs with tiles, where getting around is not particularly easy but also be comfortable on the terraces or in the garden.Pipe diameter = 48x3mm Total height = about 1,5m (5ft) It may be engaged in tubes having an inner diameter of at...
102,48 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Quick view
151,28 € If out of stock, the average preparation time for delivery: 3-7 days after receipt of paymentPST-80C
Wire loaded dipole for 80 m.14 m per arm1: 1 balun included SO2391.5KW pep
151,28 €If out of stock, the average preparation time for delivery: 3-7 days after receipt of payment -
PST2-4080C5
Dual band wire loaded dipole for 40 and 80m. 40m full-size 80m loaded40m usable bandwidth 200Kc/s80m usable bandwidth 40Kc/s11,5m for arm1:1 balun included SO2395KW pep
228,75 €In Stock -
Quick view
647,21 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-33 + Balun 1:1 1,5KW
Trapped 3 bands antenna 10 -15 -20 meters 3 elements Balun 1:1 1,5Kw included SO239
647,21 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
209,23 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-27TV
Dipole dualband trapped 12m and 17m, in V-shaped configuration, omnidirectional.2 KW pepArm length: 3,5m, ~3m footprint Mounted on poles from 40 to 50mm, 60mm optional. suggested height of at least 5m, but also works well up to 2m.The antenna does not require guy wires.10kg weightBalun 1:1 optional
209,23 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
204,96 € If NOT available from stock, the average preparation time for delivery: 7-15 daysStar base for tubular mast or vertical...
The star base makes it possible to easily install a small tubular mast or vertical antennas.It is particularly useful on terraces or land, where there are no other anchor points.Leg length = 1mTotal height = 60cm approxMast diameter = 60mm with bolts to tighten.Accepts mast up to 53mm,Material: Hot-dip galvanized steel, stainless steel nuts and bolts.
204,96 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
PST-85VF
Random vertical HF antenna. Requires tuner.Height: ~ 8.4mMax power: 5KWSWR: requires tunerWind area = 0.16m2Max wind: 130KmShipping weight = about 7.5KgAccepts 40-50mm mast (60mm on request)6060T6 aluminum, stainless steel nuts and bolts
191,54 €In Stock -
Quick view
290,36 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-274TV
Dipole multiband trapped 12m-17m and 40m, in V-shaped configuration, omnidirectional.2 KW pepArm length: 6,5m, ~4,5m footprint Mounted on poles from 40 to 50mm, 60mm optional. suggested height of at least 5m, but also works well up to 2m.The antenna does not require guy wires.11kg weightBalun 1:1 optional
290,36 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
586,82 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-33
Trapped 3 bands antenna 10 -15 -20 meters 3 elementsMax power: 2Kw pepWe recommend the use of 1: 1 Balun
586,82 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
PST-20VF
Vertical monoband antenna for 20m, with wires radiala 1/4 lambdaHeight: ~ 5.25mConnector: SO239Max power: 5KWSWR: <= 1: 1.5Wind area = 0.1m2Max wind: 130KmShipping weight = approx. 7 kgAccepts 40-50mm mast (60mm on request)6060T6 aluminum, stainless steel nuts and bolts
140,91 €In Stock -
Quick view
204,96 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-27VC
Vertical antenna 2 bands trapped (12-17m) with solid loaded radials for each one band.Full bands coverage.RF chocke for electrostatic protection.2 KW pepSO239
204,96 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
PST2-3060C5
Dual band wire loaded dipole for 30 and 60m.8,5m for each arm1:1 balun included SO2395KW pep
259,25 €In Stock -
PST2-1740C
Dual band wire loaded dipole for 17 and 40m.7m for arm1: 1 balun included SO2391,5KW pep
134,20 €In Stock -
PST2-1217TF
Dual band WIRE dipole trapped for 12 and 17m. Total lenght 3 + 3m (~20ft) 1:1 balun 1,5KW pep included SO239
164,70 €If in stock, the average preparation time for the courier: 1-3 days -
PST-80C5
Wire loaded dipole for 80 m.14 m per arm1: 1 balun included SO2395KW pep
201,30 €If in stock, the average preparation time for the courier: 1-3 day -
Quick view
307,44 € If NOT available from stock, the average preparation time for delivery: 7-15 daysStar base for vertical antenna or V with...
The star base with folding mast allows you to easily maneuver vertical antennas or V-shaped dipoles with minimal effort.It is particularly useful on terraces or land, where there are no other anchor points.Leg length = 1mTotal height = 1.7m approximatelyMast diameter = 48x3mmMaterial: Hot-dip galvanized steel, stainless steel nuts and bolts.
307,44 €If NOT available from stock, the average preparation time for delivery: 7-15 days -
Base for V or vertical antenna (male)
The base allows you to easily install vertical antennas with solid or wire radials.Down bolting assembly.It is particularly useful on roofs with tiles, where moving is not particularly easy but is comfortable even on terraces or in the garden.Mast = 1000x48x3mmPlate = 250x250x6mm holes for 10MA
83,57 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-80F
Wire dipole for 80 m.about 21 m per arm1:1 balun included SO2391.5KW pep
111,02 €If in stock, the average preparation time for the courier: 1-3 day -
PST-10VF
Vertical monoband antenna for 10m, with wire radials 1/4 lambdaHeight: ~ 2.5mConnector: SO239Max power: 5KWSWR: <= 1: 1.5Wind area = 0.04m2Max wind: 130KmShipping weight = approx. 5 kgAccepts 40-50mm mast (60mm on request)6060T6 aluminum, stainless steel nuts and bolts
117,12 €In Stock -
Folding base for Heavy Duty vertical antenna
The foldable base allows you to easily maneuver vertical antennas, even very heavy or long with minimal effort.It is particularly useful for vertical antennas of 80 or 160m.To be installed on a solid rock or concrete platform.Insulating collar available for diameters 76 or 80mm (specify when ordering)
230,58 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-LOOP1-20
Solid Delta loop for 20m band.Boom length: about 7m, projection on the ground 4m per armMounts on mast from 40 to 50mm, 60mm optional. suggested height at least 5m, works well even at 2m over the ground.The antenna does not require guy wires.Balun 2: 1 included SO239, 50Ohm full band coverage 2KW pep Winda area: 025m2 - max wind 130Km Weight 8Kg Alluminum...
278,77 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-40F
Wire dipole for 40 m.about 10.5 m per arm1:1 balun included SO2391.5KW pep
95,77 €If in stock, the average preparation time for the courier: 1-3 day -
PST-4J
J-pole antenna for 4m 5KW pep S0239
104,31 €If available in stock, the average preparation time for the courier: 1 day -
PST-30vf
Vertical monoband antenna for 30m, with wire radials 1/4 lambdaHeight: ~ 7.4mConnector: SO239Max power: 5KWSWR: <= 1: 1.5Wind area = 0.14m2Max wind: 130KmShipping weight = approx. 7 kgAccepts 40-50mm mast (60mm on request)6060T6 aluminum, stainless steel nuts and bolts
158,60 €In Stock -
PST-DDR6-30
Multiband double rotating dipole 10-12-15-17-20-30m Balun included - SO239 Max power: 2KW pep Max wind: 130km Rotating radius = 5.30m Shipping weight = 16Kg Mast diameter: 40-50mm (60mm on request) 6060T6 alluminum, SS hardware
453,23 €In Stock -
PST-DDR6-40
Multiband double rotating dipole 10-12-15-17-20-40m Balun included - SO239 Max power: 2KW pep Max wind: 130km Wind area = 0.45m2 Rotating radius = 6m Shipping weight = 16Kg Max mast diameter = 40-50mm 6060T6 alluminum, SS hardware
480,07 €In Stock -
-
Quick view
161,65 € If not available in stock, the average preparation time for the courier: 3-5 daysPST-RD12F
Rotary dipole for 10m full.Rotation radius approx. 2.5m.SWR: <= 1: 1.5No power limit. Balun 1:1 optional Wind area = 0.06m2 Max wind: 130Km Shipping weight = 5Kg Accept mast 40-50mm (60mm on request)Aluminum 6060T6, Stainless steel hardware
161,65 €If not available in stock, the average preparation time for the courier: 3-5 days -
Quick view
337,94 € If NOT available from stock, the average preparation time for delivery: 3-7 daysAntenna verticale PST-1523VC
Multiband vertical antenna trapped 10-15-20-30m, with loaded solid radials.Max solid loaded radial length = 2mUseful bandwidth:30m = ~150kc/s20m = ~250kc/s15m = total coverage10m = ~800kc/sRF chocke for electrostatic protection.2 KW pepSO239
337,94 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
209,23 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-273VF
Vertical antenna 3 bands trapped (12-17-30m) with wire radials 1/4 lambda for each one band.Full bands coverage.RF chocke for electrostatic protection.2 KW pepSO239
209,23 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
-
PST1-160F
Full size dipole for 160m1: 1 balun includedSO239Max power: 1,5KW pep
165,31 €If in stock, the average preparation time for the courier: 1-3 day -
Quick view
500,81 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST32 + Balun 1:1 1,5KW
3-bands trapped antenna 10-15-20m, 2 elementsBalun1:1, 1,5KW included Connector SO239
500,81 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
431,27 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-34TV
Dipole dualband trapped 30m 40m, in V-shaped configuration, omnidirectional.2 KW pepArm length: ~7.2m, ~10,5m footprintMounted on poles from 40 to 50mm, 60mm optional. suggested height of at least 5mThe antenna does not require guy wires.12kg weightBalun 1:1 optional
431,27 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
197,27 € If not available in stock, the average preparation time for the courier: 3-5 daysPST-RD20F
Rotary dipole for 20m full.Rotation radius approx. 5,2m.SWR: <= 2:1No power limit. Balun 1:1.5 optional Wind area = 0.2m2 Max wind: 130Km Shipping weight = 7Kg Accept mast 40-50mm (60mm on request)Aluminum 6060T6, Stainless steel hardware
197,27 €If not available in stock, the average preparation time for the courier: 3-5 days -
PST-48CL
40-80m multiband wire antenna40m full-size 80m loaded40m usable bandwidth 200Kc/s80m usable bandwidth 80Kc/sBalun 1:1 with SO239 includedLength about 28mMax power: 1,5Kw
183,00 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-80F5
Wire dipole for 80 m.about 21 m per arm1:1 balun included SO2395KW pep
161,04 €If in stock, the average preparation time for the courier: 1-3 day -
Quick view
440,42 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-32
3-bands trapped antenna 10-15-20m, 2 elementsSuggested use of 1:1 Balun Max powwr: 2kw pep Single 50ohm coax
440,42 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
-
Quick view
317,38 € If not available in stock, the average preparation time for the courier: 3-5 daysPST-RD30F
Rotary dipole for 30m full.Rotation radius approx. 7.4m.SWR: <= 2:1No power limit. Balun 1:1,5 optional Wind area = 0.3m2 Max wind: 130Km Shipping weight = 8Kg Accept mast 40-50mm (60mm on request)Aluminum 6060T6, Stainless steel hardware
317,38 €If not available in stock, the average preparation time for the courier: 3-5 days -
PST-48CL5
40-80m multiband wire antenna40m full-size, 80m loaded40m usable bandwidth 200Kc/s80m usable bandwidth 80Kc/sBalun 1:1 with SO239 includedLength about 28mMax power: 5KW pep
226,92 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-34VF
Vertical antenna 2 bands trapped (30-40m) with wire radials for each one band.Full bands coverageRF chocke for electrostatic protection.2 KW pepSO239
250,10 €If available in stock, the average preparation time for the courier: 1 day -
PST-LOOP1-17
Solid Delta loop for 17m band.Boom length: about 5.8m, projection on the ground 3m per armMounts on mast from 40 to 50mm, 60mm optional. suggested height at least 4m, works well even at 2m over the ground.The antenna does not require guy wires.Balun 2: 1 included SO239, 50Ohm full band coverage 2KW pep Winda area: 02m2 - max wind 130Km Weight 7Kg...
249,49 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-2.5J (air band)
J-pole antenna for 2.4m (Air band) 5KW pep S0239
102,24 €If available in stock, the average preparation time for the courier: 1 day -
PST11DL
Mini Delta Loop monoband 2 elements that covers the bands of 10 or 11m.Heady duty construction, grounded elements.The gamma match coupler gives better performance in terms of impedance matching and excellent wide usable bandwidth.Small size and light weight make it easy to use even in limited spaces.For optimum operation, it is recommended to mount it to...
392,23 €If available in stock, the average preparation time for the courier: 1 day -
PST-RD3017S
Rotary dipole loaded for 17 and 30m (6m)Full bands coverage also works well in 6m. Max power: 2Kw pep Balun is recommended
221,80 €If available in stock, the average preparation time for the courier: 1-3 days -
PST2051E-PRO
Heavy duty elevation antenna Rotator, handle up 2.5 m2 (23 sq. Ft.) of antenna windload. Worm-wheel technology irreversible under mast torque. Large starting and braking torque Soft start e soft stop with programmable ramp speed. Two years warranty
975,39 €Out of stock -
PST1-160F5
Full size dipole for 160m1:1 balun includedSO239Max power: 5KW pep Errata corridge: Total lenght = about 81.4m
213,50 €If in stock, the average preparation time for the courier: 1-3 days -
PST-17VF
Vertical monoband antenna for 17m, with wire radials 1/4 lambdaHeight: ~ 4.10mConnector: SO239Max power: 5KWSWR: <= 1: 1.5Wind area = 0.06m2Max wind: 130KmShipping weight = about 6.5KgAccepts 40-50mm mast (60mm on request)6060T6 aluminum, stainless steel nuts and bolts
129,93 €In Stock -
Quick view
276,94 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-23TV
Dipole dualband trapped 20m 30m, in V-shaped configuration, omnidirectional.2 KW pepArm length: ~6.2m, ~9m footprintMounted on poles from 40 to 50mm, 60mm optional. suggested height of at least 5m, but also works well up to 2m.The antenna does not require guy wires.12kg weightBalun 1:1 optional
276,94 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
PST-27VF
Vertical antenna 2 bands trapped (12-17m) with wire radials 1/4 lambda for each one band.Full bands coverage.RF chocke for electrostatic protection.2 KW pepSO239
146,40 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-248VF
Vertical antenna 3 bands trapped (20-40-80m) with wire radials 1/4 lambda for each one band.20-40m Full bands coverage. 80m about 120Kc/sRF chocke for electrostatic protection.2 KW pepSO239
588,04 €If available in stock, the average preparation time for the courier: 1 day -
PST-6M5
Yagi antenna 5 elements for 6m band
264,74 €if not available in stock, ready for shipping in 7-15 days -
PST-1523VF
Vertical antenna 4 bands trapped (10-15-20-30) with wire radials 1/4 lambda for each one band.Full bands coverage.RF chocke for electrostatic protection.2 KW pepSO239
264,13 €If available in stock, the average preparation time for the courier: 1 day -
PST-30F
Wire dipole for 30 m.about 7.5 m per arm1:1 balun included SO2391.5KW pep
87,84 €If in stock, the average preparation time for the courier: 1-3 day -
Quick view
198,86 € If NOT available from stock, the average preparation time for delivery: 3-15 daysPST-LOOP1-10
Solid Delta loop for 10m band.Boom length: about 4.3m, projection on the ground 2.6m per armMounts on mast from 40 to 50mm, 60mm optional. suggested height at least 4-5m, works well even at 2m over the ground.The antenna does not require guy wires. 50Ohm full band coverage 2KW pep Winda area: 0.15m2 - max wind 130Km Weight 5Kg Alluminum 6060T6 - Stailess...
198,86 €If NOT available from stock, the average preparation time for delivery: 3-15 days -
Quick view
235,46 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST-LOOP1-15
Solid Delta loop for 15m band.Boom length: about 55m, projection on the ground 2,5m per armMounts on mast from 40 to 50mm, 60mm optional. suggested height at least 4m, works well even at 2m over the ground.The antenna does not require guy wires. SO239, 50Ohm full band coverage 2KW pep Winda area: 02m2 - max wind 130Km Weight 7Kg Alluminum 6060T6 -...
235,46 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
Quick view
134,81 € If out of stock, the average preparation time for delivery: 3-7 days after receipt of paymentPST-40F5
Wire dipole for 40 m.about 10.5 m per arm1:1 balun included SO2395KW pep
134,81 €If out of stock, the average preparation time for delivery: 3-7 days after receipt of payment -
Quick view
453,23 € If NOT available from stock, the average preparation time for delivery: 3-7 daysPST2-1217OS
Dual band 12-17mDirective of limited size, designed to be installed in small spaces.Elements full size, power no limit, 2,2m boom.For optimum operation, it is recommended to mount at least 4-5m from the ground.We recommends the use of 1: 1 balun
453,23 €If NOT available from stock, the average preparation time for delivery: 3-7 days -
PST61E-PRO
Heavy duty elevation antenna Rotator, handle up 3.9m2 (38sq. Ft.) of antenna windload. Worm-wheel technology irreversible under mast torque. Large starting and braking torque Soft start e soft stop with programmable ramp speed. USB Com port for PC Two years warranty
1 402,39 €Out of stock -
PST71E-PRO
Extra Heavy duty elevation antenna Rotator, handle up 8.8m2 (80sq. Ft.) of antenna windload. Worm-wheel technology irreversible under mast torque. Large starting and braking torque Soft start e soft stop with programmable ramp speed. A Controller fully controllable via USB Com port Two years warranty
2 439,39 €In Stock -
PST-RR55D-PRO
Ring rotator for triangular tower up to 52cm wide.Can mount anywhere on the towerAll parts made stainless steel laser cut, included gears, wheels and bearings.Soft start and soft stop with programmable ramp speed.Weight = 34 kgMax wind area = 1.5m2Max vertical load 45 kg
2 895,06 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-15VF
Vertical monoband antenna for 15m, with wire radials 1/4 lambda Height: ~ 3.5mConnector: SO239Max power: 5KWSWR: <= 1: 1.5Wind area = 0.05m2Max wind: 130KmShipping weight = about 6KgAccepts 40-50mm mast (60mm on request)6060T6 aluminum, stainless steel nuts and bolts
127,49 €In Stock -
Quick view
169,09 € If not available in stock, the average preparation time for the courier: 3-5 daysPST-RD15F
Rotary dipole for 15m full.Rotation radius approx. 3.5m.SWR: <= 1: 1.5No power limit. Balun 1:1 optionalAccept mast 40-50mm (60mm on request)Aluminum 6060T6, Stainless steel hardware
169,09 €If not available in stock, the average preparation time for the courier: 3-5 days -
Galvanized steel mast 48x3mm 3m
Antennas pole for rotor cage or to be fixed to the wall with brackets, possibly combined with https://www.prosistelshop.com/en/wall-mounted-pole-holder-bracket-288.html
76,86 €If available in stock, the average preparation time for the courier: 1-3 days -
Quick view
206,18 € If NOT available from stock, the average preparation time for delivery: 3-15 daysPST-LOOP1-12
Solid Delta loop for 12m band.Boom length: about 4.7m, projection on the ground 2.7m per armMounts on mast from 40 to 50mm, 60mm optional. suggested height at least 4-5m, works well even at 2m over the ground.The antenna does not require guy wires. 50Ohm full band coverage 2KW pep Winda area: 015m2 - max wind 130Km Weight 5Kg Alluminum 6060T6 - Stailess...
206,18 €If NOT available from stock, the average preparation time for delivery: 3-15 days
