No products
Prices are tax included
Homebrew There are 75 products.
-
Base bracket for vertical antenna
Base bracket for vertical antennas or homemade parts.Material: Stainless steel thickness 3mmAccept insulators from 30-32-35mm and bolts 6MAAccepts U Bolts 40 to 50mm 8MAPrepared for SO239 connector
28,06 €In Stock -
Base for vertical antennas
Base bracket for vertical antennas or replacment part.Material: Stainless steelInsulators 30-32-35mm (specify in the order)U bolts 50mm 8MA (anchored to poles from 40-50mm)SO239 connectorRF Choke complete (DC grounded)Stainless steel screws
67,10 €In Stock -
-
Plate for Hexbeam or similar
Central plate 100% compatible for Hexbeam antennas or similar- Diameter = 40 cm- Thickness 6mm- Material = ERGAL
71,98 €In Stock -
Boom-element joint plate for yagi...
Universal central plate to connect the elements of a yagi to the boom.- Width = 19.5cm- Height 8cm- Thickness 6mm- Accept boom from 40-50-60-70-80mm D holes = 6.5mm- Accept U collars from 13 to 45mm and insulators from 16 to 40mm, D holes = 6.5mm- Material = ERGAL
13,42 €In Stock -
Boom-radiator interface plate for yagi...
Plate for connection boom-radiator element for yagi antennas- Width = 35cm- Height 8cm- Thickness 6mm- Accept boom from 40-50-60-70-80mm D holes = 6.5mm- Accept U collars from 13 to 45mm and insulators from 16 to 40mm, D holes = 6.5mm- Material = ERGAL
21,35 €In Stock -
Boom-radiator HD plate for yagi...
HD (Heavy Duty) plate for boom connection- radiator element for yagi antennas- Width = 35cm- Height 8cm- Thickness 8mm- Accept boom from 40-50-60-70-80mm D holes = 6.5mm- Accept U collars from 13 to 45mm and insulators from 16 to 40mm, D holes = 6.5mm- Material = ERGAL
23,79 €In Stock -
Boom-mast support for rotary dipoles...
Support for rotary dipoles and Boom-Mast interface (dipole center)Optimized drilling for 30-32-35mm insulating supportsDrilling for U bolt from 48-50mm6060 aluminum.The dipole center can be set up and completed by adding to the order the insulating collars and the stainless steel bolts
29,28 €In Stock -
Guy wire Bayco 4mm
Monofilament suitable for guy wiring.Max Load 500 kgDuration: 30 years.
0,43 €If available in stock, the average preparation time for the courier: 1-3 days -
Guy wire Bayco 6mm
Monofilament suitable for guy wiring.Max Load 1100kgDuration: 30 years.
0,85 €If available in stock, the average preparation time for the courier: 1-3 days -
Stainless steel Kit for Bayco 4 or 6mm guy...
Hardware kit needed for each one guy wire.Material: Stainless steel.
28,43 €In Stock -
Balun PST-1,5KY
Balun 1:1 on ferrite rod, suitable for rotary dipoles and yagi Max power: 1,5Kw SWR: 1.1 1-52Mhz SO239 Complete with connecting wires jumper.
49,90 €If available in stock, the average preparation time for the courier: 1-3 days -
Balun PST-5KY
Balun 1: 1 5 KW pep, ferrite core, suitable for rotary dipoles and yagi Bandwidth: 1-30Mhz SO239 Complete with connecting wires jumper
80,15 €In Stock -
Balun PST-1.5KW
Balun 1:1, 1.5 KW pep, ferrite core, suitable for wire dipoles SO239 Complete with connecting wire jumper
54,90 €In Stock -
Balun PST-5KW
Balun 1:1, 5 KW pep, ferrite core, suitable for wire dipoles SO239 Complete with connecting wire jumper
82,96 €In Stock -
Balun PST1:4TF
BALUN 1:4 on toroid Max power 3 KW pep if antenna SWR less than 2: 1 suitable for wire dipoles SO239
109,80 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-DC-IN-COAX-XL (T-BIAS)
Bundle kit to realize the interface with which to introduce and withdraw a direct voltage on coaxial cable (T-bias).Amphenol original SO239 connectorsRange 1-30MhzMax power 1,2KW pepMax VDC 48V 1A
30,50 €If available in stock, the average preparation time for the courier: 1-3 days -
PST-DC-COAX-XL
Couple of interfaces to send VDC trought coaxial cable.SO239 connectors1-80Mhz rangeMax power 1,5KW pepMax VDC 48V 1A
91,50 €In Stock -
PST-RS2COAX
Remote 2-way switch controlled via coaxial cable.SO 239 connectorsRange 1-80Mhz SWR <= 1:1-2Insertion Loss: 0.1dBMax power 1,5KW pepMax VDC 12V 0.15A
60,39 €If available in stock, the average preparation time for the courier: 1-3 days -
-
-
-
-
-
-
-
Insulating collar for 50mm OD tubes
Plastic collars for 50 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 80x6MA
2,44 €If available in stock, delivery time: 1-2 days -
Insulating collar for 45mm OD tubes
Plastic collars for 45 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 80x6MA
2,32 €If available in stock, delivery time: 1-2 days -
Insulating collar for 60mm OD tubes
Plastic collars for 60 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 10-12MA
9,15 €If available in stock, delivery time: 1-2 days -
Insulating collar for 40mm OD tubes
Plastic collars for 40 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 70x6MA
2,07 €If available in stock, delivery time: 1-2 days -
Insulating collar for 35mm OD tubes
Plastic collars for 35 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 70x6MA
1,95 €If available in stock, delivery time: 1-2 days -
Insulating collar for 32mm OD tubes
Plastic collars for 32 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 70x6MA
1,65 €If available in stock, delivery time: 1-2 days -
Insulating collar for 30mm OD tubes
Plastic collars for 30 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 60x6MA
1,65 €If available in stock, delivery time: 1-2 days -
Insulating collar for 25mm OD tubes
Plastic collars for 25 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 50x6MA
1,46 €If available in stock, delivery time: 1-2 days -
Insulating collar for 20mm OD tubes
Plastic collars for 20 mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 50x6MA
1,22 €If available in stock, delivery time: 1-2 days -
Insulating collar for 16mm OD tubes
Plastic collars for 16mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 40x6MA
1,10 €If available in stock, delivery time: 1-2 days -
Insulating collar for12mm OD tubes
Plastic collars for 16mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 6MA, lenght iaw with plate or boom pipe tickness.
1,04 €If available in stock, delivery time: 1-2 days -
Insulating collar for 10mm OD tubes
Plastic collars for 16mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 6MA, lenght iaw with plate or boom pipe tickness.
1,00 €If available in stock, delivery time: 1-2 days -
Insulating collar for 8mm OD tubes
Plastic collars for 8mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 6MA, lenght iaw with plate or boom pipe tickness.
1,00 €If available in stock, delivery time: 1-2 days -
Insulating collar for 6mm OD tubes
Plastic collars for 6mm OD tubes.The collar consists of two halves and is supplied without bolts to be ordered separately.It requires bolts 6MA, lenght iaw with plate or boom pipe tickness.
1,00 €If available in stock, delivery time: 1-2 days -
Bolt TCEI 40x6MA
Stainless steel hallen Bolt 40x6MA
0,49 €if available in stock, delivery time: 1-2 days -
-
-
-
-
Standard Rotator cage
Standard rotator cage.Included thrust bearing and 2m mast pipe Od 48mmPluggable into tubes with an inner diameter of at least 43mm.Universal drilling for Prosistel rotors, CDE / HAM, Create, Daiwa, Kempro, Yaesu etc.
145,88 €If available in stock, the average preparation time for the courier: 1-3 days -
Custom rotator cage
Custom rotator cage.Included thrust bearing and 2m mast pipe Od 48mmPluggable on tubes with an outer diameter of 42-52mm.Universal drilling for Prosistel rotors, CDE / HAM, Create, Daiwa, Kempro, Yaesu etc.
159,77 €If available in stock, the average preparation time for the courier: 1-3 days -
Heavy Duty rotator cage
HD rotator cage.Included thrust bearing and 2m mast pipe Od 48mmPluggable on tubes with an outer diameter of 50-68mm.Universal drilling for Prosistel rotors, CDE / HAM, Create, Daiwa, Kempro, Yaesu etc.
174,45 €If available in stock, the average preparation time for the courier: 1-3 days -
Folding base for V or vertical antenna (male)
The folding base enabling you to operate the vertical antennas or dipoles V with minimal effort.It is especially useful on roofs with tiles, where getting around is not particularly easy but also be comfortable on the terraces or in the garden.Pipe diameter = 48x3mmIt may be engaged in tubes having an inner diameter of at least 50mm.
97,60 €If available in stock, the average preparation time for the courier: 1-3 days -
Folding base for V or vertical antenna...
The folding base enabling you to operate the vertical antennas or dipoles V with minimal effort.It is especially useful on roofs with tiles, where getting around is not particularly easy but also be comfortable on the terraces or in the garden.Pipe diameter = 48x3mmIt can be installed on the side of pipes with outer diameters from 42 to 60mm.
115,90 €If available in stock, the average preparation time for the courier: 1-3 days -
Central insulator for rotating dipole or...
Central insulator machined to size to 35x2mm pipes (31 mm internal) Material: Delrin
14,64 €If in stock, delivery time to the carrier: 1-2 days -
Central insulator for rotating dipole or...
Central insulator machined for 30x2mm pipes (26 mm internal) Material: Delrin
12,20 €If in stock, delivery time to the carrier: 1-2 days -
-
-
Insulator spacer for parallel wire...
Insulator spacer in ABS for assembling dipoles with parallel wires or Morgain antennas.Spacing between wires = 5cmAccepts wire with outside diameter ~ 4mm Mounting by 3x10MA screws or pop rivets 3x10mm
2,32 €If available in stock, delivery time: 1-2 days -
30m band up-grade kit
With this expansion kit, the 30m band is added to the following base antennas: PST-152TV - PST-27TV - PST32 - PST33 -PST35 - PST54 - PST-DDR5 - PST-DDR6-30 - PST-RD152T - PST-RD27T
70,14 €if available in stock, ready for shipping in 1-3 days -
Potentiometer 10K
Potentiometer 10K, spare part for rotators PST641, 2051, 61, 71 series A-B-C-D
18,30 €If available in stock, the average preparation time for the courier: 1-3 days -
METROVNA PRO 180MHZ
-15 Internal Menus - Full coverage 180MHz 630/2mt - Six Multi Band Meter - RF Generator 100KHz/180MHz Special offer.
284,26 €If available in stock, the average preparation time for the courier: 1-3 days -
METROVNA DELUXE 250MHZ
-20 Internal Menus - Full coverage 250MHz 630/1.25mt - uWattmeter - Digital Grid Dip Meter - Coax cable Meter - Menu Easy Fix Antenna - RF Generator 50KHz/250MHz overtone up to 750MHz Special offer.
325,74 €If available in stock, the average preparation time for the courier: 1-3 days -
-
PST-85VF
Random vertical HF antenna. Requires tuner.Height: ~ 8.4mConnector: SO239Max power: 5KWMax wind: 130KMSupport pole diameter: 40-50mm
134,20 €In Stock -
Guy wires anchor plate
Guy wires anchor plateCapacity 1000KgHot galvanized steelDiameter 135mmHoles x 10MA
36,60 €In Stock -
Rotator cable PRO.SIS.TEL.
Antenna rotator cable for Prosistel D - D-PRO series 2x1mm2 4x0.5mm2 1 schield (increases protection against atmospheric discharge and galvanic currents) De = about 8mm The cable can also be used on other rotors that require the same number of wires.
1,71 €If available in stock, the average preparation time for the courier: 1-3 days -
Rotator cable
Prosistel D/E-PRO series antenna rotor cable
3,05 €If available in stock, the average preparation time for the courier: 1-3 days -
expansion kit for 6m
With this additional kit antennas PST-152TV, PST-1524TV and PST-24TV also operate on 6m.
42,70 €If available in stock, the average preparation time for the courier: 1-3 days -
Flange for guy wires
Flange for vertical antennas guy wires Inner hole 25mm (other diameters on request)
9,76 €If available in stock, delivery time: 1-2 days -
Insulators for V-UHF yagi elements
Insulator for V-UHF yagi elementsAccept 6mm elementsSquare boom of 20 or 25mm4MA stainless steel bolt with self-locking nut
1,83 €If available in stock, delivery time: 1-2 days -
SS U bolt for 35-38mm square tube
SS U bolt for 35-38mm square tube
3,66 €If available in stock, delivery time to the courier: 1-2 days -
SS U bolt for 40-42mm square tube
SS U bolt for 40-42mm square tube
3,90 €If available in stock, delivery time to the courier: 1-2 days -
Star base for vertical antenna or V with...
The star base with folding mast allows you to easily maneuver vertical antennas or V-shaped dipoles with minimal effort.It is particularly useful on terraces or land, where there are no other anchor points.Leg length = 1mTotal height = 1.7m approximatelyMast diameter = 48x3mmMaterial: Hot-dip galvanized steel, stainless steel nuts and bolts.
292,80 €If available in stock, the average preparation time for the courier: 1-3 days -
Star base for tubular mast or vertical...
The star base makes it possible to easily install a small tubular mast or vertical antennas.It is particularly useful on terraces or land, where there are no other anchor points.Leg length = 1mTotal height = 60cm approxMast diameter = 60mm with bolts to tighten.Accepts mast up to 53mm,Material: Hot-dip galvanized steel, stainless steel nuts and bolts.
195,20 €If available in stock, the average preparation time for the courier: 1-3 days -
30m band up-grade kit for vertical antennas
With this expansion kit, the 30m band is added to the following base antennas: PST-152VC - PST-27VC
70,14 €In Stock -
40m expansion kit for vertical antennas
With this upgrade kit you add the band of 40m to the following antennas: PST-152VC - PST-27VC
79,62 €if available in stock, ready for shipping in 1-3 days -
Folding base for Heavy Duty vertical antenna
The foldable base allows you to easily maneuver vertical antennas, even very heavy or long with minimal effort.It is particularly useful for vertical antennas of 80 or 160m.To be installed on a solid rock or concrete platform.Insulating collar available for diameters 76 or 80mm (specify when ordering)
219,60 €If available in stock, the average preparation time for the courier: 1-3 days -
Folding base for V or vertical antenna (male)
The base allows you to easily install vertical antennas with solid or wire radials.Down bolting assembly.It is particularly useful on roofs with tiles, where moving is not particularly easy but is comfortable even on terraces or in the garden.Mast = 1000x48x3mmPlate = 250x250x6mm holes for 10MA
79,30 €If available in stock, the average preparation time for the courier: 1-3 days
